Stainless Steel Chassis Stamping Die Components OEM Sheet Metal Fabricated

Customized OEM Sheet Metal Fabricated Stainless Steel Chassis Die Stamping Part

Metal Stamping Parts                                                             

Xincheng stamping manufacturing plant can meet your specific application needs. No matter what you need is a large, heavy, thick-walled support component, a small, complex component, or a component that needs to be hardened and finished after stamping, Xincheng Stamping is able to help you.

We provide continuous stamping and prototype stamping to ensure that the stamping products you receive can meet the needs of your industry.

Operation

• Bending - the material is deformed or bent along a straight line.
• Flanging - the material is bent along a curved line.
• Embossing - the material is stretched into a shallow depression. Used primarily for adding decorative patterns. See also Repoussé and chasing.
• Blanking - a piece is cut out of a sheet of the material, usually to make a blank for further processing.
• Coining - a pattern is compressed or squeezed into the material. Traditionally used to make coins.
• Drawing - the surface area of a blank is stretched into an alternate shape via controlled material flow. See also deep drawing.
• Stretching - the surface area of a blank is increased by tension, with no inward movement of the blank edge. Often used to make smooth auto parts.
• Ironing - the material is squeezed and reduced in thickness along a vertical wall. Used for beverage cans and ammunition cartridge cases.
• Reducing/Necking - used to gradually reduce the diameter of the open end of a vessel or tube.
• Curling - deforming material into a tubular profile. Door hinges are a common example.
• Hemming - folding an edge over onto itself to add thickness. The edges of automobile doors are usually hemmed.

Independent research and development of non-standard automation device, intelligent correction/inspection integration, to ensure quality uniformity.

Our servies